Disconnect and connect
Disconnect
1. Press the release button.
2. Pull the connector housings apart.
Connect
1. Align the connector housings.
2. Press the housings together until the locking tab snaps into place.
Remove terminal
| PART NUMBER | TOOL NAME |
| B-50085 | TERMINAL EXTRACTOR |
1. File the edge of a TERMINAL EXTRACTOR (Part No. B-50085) to a 45 degree angle.
2. See Figure A-11. Remove secondary lock (3) from housing (2).
3. Insert the extractor into the cavity next to the terminal. Press the plastic tang (4) away from the terminal (1).
4. Gently pull the wire to remove the terminal from the connector housing.
Install terminal
1. Align terminal to the housing.
2. Install the terminal into the housing. Terminal snaps into place.
3. Gently pull wire to verify terminals are locked.
4. Install secondary lock into connector.
Figure A-11. Furukawa QLW Sealed Connector: 1. Terminal; 2. Housing; 3. Secondary lock; 4. Tang