Disconnect and connect
Disconnect
1. Press the release button.
2. Pull the connector housings apart.
Connect
1. Align the connector housings.
2. Press the housings together until the lock clicks into place.
Remove terminal
PART NUMBER | TOOL NAME |
B-50085 | TERMINAL EXTRACTOR |
1. File the edge of a TERMINAL EXTRACTOR (Part No. B-50085) to a 45 degree angle.
2. See Figure A-36. Pry secondary lock (1) from housing (3).
3. Insert the extractor into the cavity (4) next to the terminal (2). Press the plastic tang away from the terminal.
4. Gently pull the wire to remove the terminal from the housing.
Install terminal
1. Align terminal to the housing. Install the terminal into the housing. Terminal will snap into place.
2. Gently pull wire to verify terminals are locked.
3. See Figure A-36. Install secondary lock into connector (1).
![](https://motoinstruction.ru/img/harley/22/127975.jpg)
Figure A-36. Yazaki SSD Sealed Connector: 1. Secondary lock; 2. Terminal; 3. Housing; 4. Cavity