Prepare
1. Remove main fuse. See Power disconnect.
Remove
1. See Figure 8-44. Remove cable straps (6).
2. Disconnect jiffy stand sensor connector.
3. Remove jiffy stand sensor.
- a. Remove short screw (2) and nut (5).
- b. Remove long screw (1).
- c. Remove bracket (3) and jiffy stand sensor (4).
Install
FASTENER | TORQUE VALUE | |
Jiffy stand sensor bracket screw | 22.0-29.0 Nm | 17-21 ft·lbs |
Jiffy stand sensor screw | 9.0-11.0 Nm | 80-97 in·lbs |
1. See Figure 8-44. Install jiffy stand sensor.
- a. Install jiffy stand sensor (4) into bracket (3).
- b. Install bracket using long screw (1). Tighten to 22.0-29.0 Nm (17-21 ft·lbs).
- c. Secure jiffy stand sensor using short screw (2) and nut (5). Tighten to 9.0-11.0 Nm (80-97 in·lbs).
2. Connect jiffy stand sensor connector.
3. Install new cable straps (6).
![](https://motoinstruction.ru/img/harley/22/127928.jpg)
Figure 8-44. Jiffy Stand Sensor: 1. Long screw; 2. Short screw; 3. Bracket; 4. Jiffy stand sensor; 5. Nut; 6. Cable strap (2)
Complete
1. Install main fuse. See Power disconnect.