Disconnect and connect
Disconnect
1. Press the locking tab.
2. Pull the connector housings apart.
Connect
1. Align the connector housings.
2. Press the housings together until the locking tab snaps into place.
Remove terminal
PART NUMBER | TOOL NAME |
B-50085 | TERMINAL EXTRACTOR |
1. File the edge of a TERMINAL EXTRACTOR (Part No. B-50085) to a 45 degree angle.
2. See Figure A-25. Insert the extractor into the cavity (3) next to the terminal (1). Bend the metal tang (4) of the terminal flush with the terminal body.
3. Gently pull the wire to remove the terminal from the connector housing (2).
Install terminal
1. See Figure A-25. Bend metal tang (4) of terminal (1) up.
2. Align terminal to the housing. Install the terminal into the housing. Terminal will snap into place.
3. Gently pull wire to verify terminals are locked.
![](https://motoinstruction.ru/img/harley/22/127964.jpg)
Figure A-25. Sumitomo MTW and MTL Unsealed Connector: 1. Terminal; 2. Housing; 3. Cavity; 4. Tang