Prepare
1. Remove main fuse. See Power disconnect.
2. Remove drive belt cover. See Drive belt.
Remove
1. See Figure 8-42. Disconnect VSS connector (2).
2. Remove VSS.
- a. Remove screw (1).
- b. Remove VSS (3).
Install
| FASTENER | TORQUE VALUE | |
| VSS screw | 7.0-9.0 Nm | 62-79 in·lbs |
1. See Figure 8-42. Install VSS.
- a. Install VSS (3).
- b. Install screw (1). Tighten to 7.0-9.0 Nm (62-79 in·lbs).
2. Connect VSS connector (2).
Figure 8-42. Vehicle Speed Sensor (VSS): 1. Screw; 2. VSS connector; 3. VSS
Complete
1. Install drive belt cover. See Drive belt.
2. Install main fuse. See Power disconnect.