Disconnect and connect
Disconnect
1. See Figure A-29. Pull the latch lock open (1).
2. While pressing the latch (3), pull the connector housings apart.
Connect
1. Align the connector housings.
2. Press the housings together.
3. Push the latch lock closed (2).
![](https://motoinstruction.ru/img/harley/22/127968.jpg)
Figure A-29. Tyco GET 64 Sealed Connector Latch and Lock: 1. Latch lock (open); 2. Latch lock (closed); 3. Connector latch
Remove terminal
PART NUMBER | TOOL NAME |
B-50085 | TERMINAL EXTRACTOR |
1. See Figure A-30. Remove secondary lock from the housing.
2. See Figure A-31. Insert TERMINAL EXTRACTOR (Part No. B-50085) into the cavity next to the terminal.
3. Pry and hold the plastic tang away from the terminal.
4. Pull on the wire lead to remove the terminal.
![](https://motoinstruction.ru/img/harley/22/127969.jpg)
Figure A-30. Tyco GET 64 Secondary Lock
![](https://motoinstruction.ru/img/harley/22/127970.jpg)
Figure A-31. Removing Terminals: Tyco GET 64 Sealed Connector: 1. Terminal extractor; 2. Retention beam
Install terminal
1 See Figure A-32. Align the open side of the crimp to the tang side of the housing cavity.
2. Install the terminal into the housing. Terminal will snap into place.
3. Install secondary lock into the housing.
![](https://motoinstruction.ru/img/harley/22/127971.jpg)
Figure A-32. Socket Terminal Orientation: Crimp Open Side
Crimp terminal
PART NUMBER | TOOL NAME |
HD-50120 | UNIVERSAL CRIMPER SET |
HD-50120-2 | HAND CRIMP FRAME |
HD-50120-7 | TYCO GET 64 DIE |
Crimping Tyco GET 64 terminals requires the use of the TYCO GET 64 DIE (Part No. HD-50120-7) in the HAND CRIMP FRAME (Part No. HD-50120-2). These items are included in the UNIVERSAL CRIMPER SET (Part No. HD-50120).
For the correct terminal crimping procedure, refer to the tool instructions.