Fastener torque values (Harley Street 500, 2014-2021) [Information for owner: Maintenance]

The table below lists torque values for all fasteners presented in this chapter.

Fastener	Torque value		Notes
Air filter bracket nuts	6.0-8.0 Nm	54-70 in·lbs	Inspect air filter, Install
Air filter cover screw	6.0-8.0 Nm	54-70 in·lbs	Inspect air filter, Install
Battery ground stud	6.0-10.0 Nm	54-88 in·lbs	Inspect battery, Install
Electrical panel screw	2.3-3.3 Nm	21-29 in·lbs	Inspect battery, Install
Engine oil drain plug	20.0-25.0 Nm	15-18 ft·lbs	Replace engine oil and filter, Change Oil and Oil Filter
Fork stem pinch screw	50.0-60.0 Nm	37-44 ft·lbs	Adjust steering head bearings, Fall-Away
Fork stem screw, first torque	22.6 Nm	200in·lbs	Adjust steering head bearings, Fall-Away
Fork stem screw, second torque	8.5 Nm	75in·lbs	Adjust steering head bearings, Fall-Away
Front brake master cylinder reservoir cover screw	2.0-4.0 Nm	18-35 in·lbs	Inspect brakes, Replace Front Brake Pads
Front brake pad pin	14.8-19.5 Nm	131-173 in·lbs	Inspect brakes, Replace Front Brake Pads
Lower fork bracket pinch screw	34.3-39.2 Nm	26-28 ft·lbs	Adjust steering head bearings, Fall-Away
Negative battery terminal screw	6.8-7.9 Nm	60-70 in·lbs	Inspect battery, Install
Positive battery terminal screw	6.8-7.9 Nm	60-70 in·lbs	Inspect battery, Install
Radiator shroud screw	9.0-11.0 Nm	80-97 in·lbs	Inspect radiator and coolant, Clean Radiator
Rear brake master cylinder reservoir cover screw	2.0-4.0 Nm	18-35 in·lbs	Inspect brakes, Replace Rear Brake Pads
Rear brake pad pin	14.8-19.5 Nm	131-173 in·lbs	Inspect brakes, Replace Rear Brake Pads
Rear brake pushrod jamnut	7.0-9.0 Nm	62-79 in·lbs	Adjust brake linkage, Adjust
Spark plug	10.0-12.0 Nm	89-106 in·lbs	Replace spark plugs, Install
Valve adjuster jamnut	10.0-12.0 Nm	89-106 in·lbs	Inspect and adjust valve lash, Inspect and Adjust

Fastener torque values (Harley Street 750)