Servicing a new motorcycle
Warning: Perform the service and maintenance operations as indicated in the regular service interval table. Lack of regular maintenance at the recommended intervals can affect the safe operation of your motorcycle, which could result in death or serious injury.
Perform necessary set-up tasks before customer delivery. See applicable model year predelivery and set-up instructions.
The performance of new motorcycle initial service is required to keep warranty in force and to verify proper emissions systems operation. See Maintenance schedule.
Inspect motorcycle regularly for additional maintenance needs. Routinely check components between regular maintenance intervals. Always inspect motorcycle after periods of storage before riding.
Perform all of the checks in the PRE-RIDING CHECKLIST in the owner's manual following any service procedure. Operate the motorcycle to perform any final check or adjustments. If all is correct, the vehicle is ready to return to the customer.
Secure the motorcycle for service
Part number | Tool name |
HD-45968 | Fat jack |
Warning: Be sure to check capacity rating and condition of hoists, slings, chains and cables before use. Exceeding capacity ratings or using lifting devices that are in poor condition can lead to an accident, which could result in death or serious injury.
Always use blocking or proper stands to support motorcycle.
Set Motorcycle Upright
1. Place motorcycle upright on a level surface or suitable lift if available.
2. Verify that motorcycle is level.
3. Secure with tie-downs.
Raise Front or Rear Wheel for Service
1. Verify that motorcycle is level.
2. Use a FAT JACK (Part No. HD-45968) or similar to raise the motorcycle to service a front or rear wheel.
3. Secure with tie-downs.
4. If necessary, remove shock absorbers and raise the rear fork for service.