Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
Note: Note the position and routing of the main harness and headlight multiplug for installation.
1. Detach the main harness and headlight multiplug from their clips on the front subframe.
2. Disconnect the multiplug from the instruments.
Note: Note the position of the instrument and mounting plate assembly on the front subframe.
3. Release the lock nuts securing the instrument and mounting plate assembly to the hinge on the front subframe.
4. Remove the instrument and mounting plate assembly from the front subframe, unhooking the mounting plate pivot stop as you do so.
![](https://motoinstruction.ru/img/triumph/15/121957.jpg)
1. Lock nuts (shown with harnesses removed for clarity); 2. Instrument and mounting plate assembly; 3. Hinge; 4. Mounting plate pivot stop
Note: Note the positions of the grommets and the hinge mounting studs assembly on the instrument mounting plate.
5. Release the fixings and washers and remove the instruments from the mounting plate. Collect the hinge mounting studs assembly.
![](https://motoinstruction.ru/img/triumph/15/121958.jpg)
1. Instruments; 2. Mounting plate; 3. Fixings; 4. Washers; 5. Hinge mounting studs assembly