Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
1. Ensure the two rubber grommets are fitted to the headlight bracket.
2. Fit the headlight bracket to the headlight assembly with two fixings and washers ensuring the rubber grommet from the headlight cable is fitted to the bracket. Tighten to 3 Nm.
![](https://motoinstruction.ru/img/triumph/15/121972.jpg)
1. Fixing; 2. Washer; 3. Rubber grommet; 4. Headlight bracket; 5. Headlight assembly; 6. Headlight cable rubber grommet
3. Install the headlight assembly to the front subframe with two fixings and washers, ensuring the rubber grommets are fitted to the front subframe. Tighten to 3 Nm.
4. Install the two headlight bracket screws and tighten to 7 Nm.
![](https://motoinstruction.ru/img/triumph/15/121973.jpg)
Headlight assembly (front subframe shown removed for clarity) 1. Headlight fixing; 2. Washer; 3. Rubber grommet; 4. Headlight assembly; 5. Headlight bracket fixings
5. Connect the headlight lead to the harness.
![](https://motoinstruction.ru/img/triumph/15/121974.jpg)
1. Headlight lead connector
Perform the following operations:
- Flyscreen - installation
- Battery - installation
- Seat - installation
- Headlight Adjustment