Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Note: Ensure the rubber grommets are fitted to the instrument mounting plate as noted during removal.
1. Fit the hinge mounting studs assembly to the instrument mounting plate as noted during removal.
2. Fit the instruments to the mounting plate, ensuring that the locating lugs are correctly inserted into the mounting plate grommets. Secure with the fixings and washers and tighten to 3.5 Nm.
1. Instruments; 2. Mounting plate; 3. Fixings; 4. Washers; 5. Hinge mounting studs assembly
3. Position the instrument and mounting plate assembly to the hinge on the front subframe as noted during removal. Ensure the mounting plate pivot stop is correctly located into its slot on the front subframe.
4. Secure the assembly with new lock nuts and tighten to 5 Nm.
1. Lock nuts (shown with harnesses removed for clarity); 2. Instrument and mounting plate assembly; 3. Hinge; 4. Mounting plate pivot stop
5. Connect the instruments multiplug.
6. Attach the main harness and headlight multiplug to their clips on the front subframe as noted during removal.
Perform the following operations: