Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
Note: Note the position and orientation of the mounting plate and the seal of the rear indicator hanger for installation.
![](https://motoinstruction.ru/img/triumph/15/121979.jpg)
1. Gasket; 2. Mounting plate
1. Carefully release the clips and remove the reflector from the indicator hanger.
![](https://motoinstruction.ru/img/triumph/15/121980.jpg)
1. Clips; 2. Reflector
2. Release the fixings and remove the licence plate bracket.
![](https://motoinstruction.ru/img/triumph/15/121981.jpg)
1. Fixings; 2. Licence plate bracket
3. Release the fixings and detach the indicators from the hanger.
![](https://motoinstruction.ru/img/triumph/15/121982.jpg)
1. Fixing; 2. Indicator
4. Carefully remove the lower moulding from the upper moulding of the hanger.
![](https://motoinstruction.ru/img/triumph/15/121983.jpg)
1. Lower moulding; 2. Upper moulding
Note: Note the routing of the harnesses in the upper moulding. Note that the right hand indicator harness can be identified by the red tape on it.
5. Disconnect the indicator from the sub-harness and remove the indicator.
![](https://motoinstruction.ru/img/triumph/15/121984.jpg)
1. Left hand indicator harness; 2. Red tape; 3. Right hand indicator harness