The electronic signals thus obtained are transmitted to the ECU, where they are used to make corrections in accordance with the temperature reading.
Note: To test the operation of the injector, use the DDS tester and follow the instructions given in the paragraph "Guided diagnosis".
Removal of the air temperature sensor
To remove the air temperature sensor (1), first remove the airbox (Removal of the airbox), disconnect the main wiring harness connector from the sensor (1), unscrew and remove the two sensor retaining screws (2) and remove the sensor from the intake manifold of the vertical cylinder (3).
![](https://motoinstruction.ru/img/ducati/18/124267.jpg)
![](https://motoinstruction.ru/img/ducati/18/124268.jpg)
Refitting the air temperature sensor
Refitting is the reverse of removal.
On completion of the refitting operation, reconnect the wiring connector to the sensor (1).
Refit the airbox (Refitting the airbox).