Note. To start the engine, the Off/Run switch MUST be in the RUN position.
See Figure 5. The electric start switch is located in the control group to the right of the steering wheel. See OPERATION, Starting the Engine: VRSC Motorcycle Models for more details on how to control the switch.
1. Set the engine on/off switch to the RUN position and the transmission to the neutral position. The neutral indicator should light up (Green colour).
2. See Figure 4. Turn the ignition key switch/headlight switch to the IGNITION position, then press the START switch to start the engine using the starter motor.
![](https://motoinstruction.ru/img/harley/2/110780.jpg)
Figure 5. Steering wheel controls: 1. Manual clutch lever; 2. Horn switch; 3. Headlight switch; 4. Left turn indicator switch; 5. Front brake system reservoir; 6. Electric starter switch; 7. Switch that turns on the motor (Engine OFF/RUN); 8. Front brake lever; 9. Throttle control handle; 10. Throttle clutch adjustment screw; 11. Right turn indicator switch; 12. Clutch master cylinder reservoir