Briefly press the turn signal switch you require. The turn signal lights will begin to flash - they will continue to flash until they are turned off - manually or automatically. The turn signal lights will flash until the motorcycle starts moving.
Notes:
- If you signal a turn in the first direction and then press the turn signal switch in the opposite direction, the turn signal in the first direction will turn off and the lights on the other side of the motorcycle will flash to indicate a turn in the opposite direction.
- If you want the lights to stop flashing, briefly press the turn signal switch again. The turn signal lights will stop flashing.
Motorcycle emergency stop indicators
To turn on your motorcycle's warning lights, use the following method:
1. When the ignition key is in the ON position and the security system is turned off (for models with only a security system installed) – simultaneously press both turn signal switches.
2. Turn the ignition key to OFF and turn on the security system (if installed and if desired). The motorcycle's warning lights will continue to operate for two hours.
3. To stop the motorcycle's emergency stop indicators, if necessary, turn off the security system, then turn the ignition key to the ON position and simultaneously press both turn signal switches at once.
This system allows you to leave your motorcycle on the side of the road with the motorcycle's warning lights and safety system activated until help arrives.