![](https://motoinstruction.ru/img/kawasaki/23/129305.jpg)
1. ABS Hydraulic Unit; 2. Brake Hose; 3. Brake Hose; 4. Damper; 5. Clamp; 6. Clamp; 7. Bracket; 8. Brake Hose; 9. Front Wheel Rotation Sensor Lead; 10. Front Wheel Rotation Sensor; 11. Front Wheel Rotation Sensor Rotor; 12. Viewed bottom side; 13. Viewed upside
![](https://motoinstruction.ru/img/kawasaki/23/129306.jpg)
1. Through the front wheel rotation sensor lead to the outside of the main harness; 2. Through the front wheel rotation sensor lead inside the right switch housing lead and ignition switch lead, and outside of the head pipe; 3. Front Wheel Rotation Sensor Lead; 4. Clamp; 5. Through the front wheel rotation sensor lead outside the main harness; 6. Clamp (Clamp the brake hose and front wheel rotation sensor lead, and insert the clamp from the front.); 7. Clamp (Insert the clamp in the front fender.); 8. Clamp (Clamp the brake hose and front wheel rotation sensor lead at the marked portion of the sensor lead, and insert the clamp from the front.)
![](https://motoinstruction.ru/img/kawasaki/23/129307.jpg)
1. Run the brake hose between the throttle cables and left switch housing lead; 2. Front Wheel Rotation Sensor Lead; 3. Clamp; 4. Clamps (Insert the clamps in the baffle plate.); 5. Front Wheel Rotation Sensor Lead (Front Side)
![](https://motoinstruction.ru/img/kawasaki/23/129308.jpg)
1. Brake Hose; 2. Clamp (Clamp the right switch housing lead, throttle cables, and brake hose.); 3. Throttle Cable (Decelerator); 4. Throttle Cable (Accelerator); 5. Right Switch Housing Lead; 6. Install the clamp to the frame, and clamp the right switch housing lead connector.
![](https://motoinstruction.ru/img/kawasaki/23/129309.jpg)
1. ABS Hydraulic Unit; 2. Brake Hose; 3. Rear Wheel Rotation Sensor Lead; 4. Clamps; 5. Band; 6. Brake Hose; 7. Brake Hose; 8. Rear Wheel Rotation Sensor; 9. Face the paint mark outside; 10. Viewed A
![](https://motoinstruction.ru/img/kawasaki/23/129310.jpg)
1. Clamp (Clamp the brake hose and front wheel rotation sensor lead, and insert the clamp from the outside.); 2. Clamp the brake hose and rear wheel rotation sensor lead with the band to the frame bracket (Position the band so that the edge of the band faces outward of the motorcycle.); 3. Regulator/Rectifier Lead; 4. Rear Brake Light Switch Lead; 5. Brake Hose; 6. Clamps (Insert the clamps in the swingarm.); 7. Through the rear wheel rotation sensor lead to the inside of the boss; 8. Through the regulator/rectifier lead under the brake hose; 9. Through the speed sensor lead upper the battery positive cable and battery negative cable; 10. Through the speed sensor lead under the brake hose; 11. Through the vehicle-down sensor lead under the brake hose and rear wheel rotation sensor lead; 12. From the on sequentially, through the rear wheel rotation sensor lead, brake hoses, and brake light switch lead; 13. Rear Wheel Rotation Sensor Lead; 14. Through the regulator/rectifier lead inside the ABS hydraulic unit bracket; 15. Clamp (Clamp the regulator/rectifier lead.)
![](https://motoinstruction.ru/img/kawasaki/23/129311.jpg)
1. ABS Solenoid Valve Relay Fuse 25A (Insert the connector from the bottom in the rear fender side bracket.); 2. ABS Pump Motor Relay Fuse 30A (Insert the connector from the bottom in the rear fender side bracket.); 3. Battery Positive Cable; 4. ABS Kawasaki Self-diagnosis System Connector (Insert the connector to the bracket.); 5. Battery Positive Lead (To main harness); 6. After connecting the battery positive lead connector, and insert the connector in the clamp; 7. Through the battery positive lead under the frame pipe and run it at the two grooves of the rear fender
![](https://motoinstruction.ru/img/kawasaki/23/129312.jpg)
1. Through the ECU lead to the forward of the frame cross pipe; 2. ABS Hydraulic Unit