Inspection
Install the starter driven gear onto the starter clutch and turn the starter driven gear by hand to inspect the starter clutch for a smooth movement. The gear turns in one direction only. If a large resistance is felt for rotation, inspect the starter clutch or the starter clutch contacting surface on the starter driven gear for wear and damage.
If they are found to be damaged, replace them with new ones.
![](https://motoinstruction.ru/img/suzuki/14/120103.jpg)
Inspect the starter driven gear bearing for any damage.
![](https://motoinstruction.ru/img/suzuki/14/120104.jpg)
Disassembly
Hold the generator rotor with the special tool and remove the starter clutch bolts.
- 09930-44530: Rotor holder
![](https://motoinstruction.ru/img/suzuki/14/120105.jpg)
Remove the one way clutch (1) from the guide (2).
![](https://motoinstruction.ru/img/suzuki/14/120106.jpg)
Reassembly
When inserting the one-way clutch (1) into the guide (2), fit the flange (A) in the step of the guide (2).
![](https://motoinstruction.ru/img/suzuki/14/120107.jpg)
Be sure to seat the flange (A) of the one way clutch (3) to the guide (4).
![](https://motoinstruction.ru/img/suzuki/14/120108.jpg)
Install the guide (5) to the generator rotor with the arrow mark (B) faced upward.
![](https://motoinstruction.ru/img/suzuki/14/120109.jpg)
Apply THREAD LOCK SUPER to the bolts and tighten them to the specified torque.
- 99000-32030: THREAD LOCK SUPER "1303"
- Starter clutch bolt: 25 N·m (2.5 kgf·m, 18.0 lb·ft)
Apply engine oil to the one way clutch.
![](https://motoinstruction.ru/img/suzuki/14/120110.jpg)