Warning!
- Make sure the motorcycle is stabilised and adequately supported.
- A correctly supported motorcycle will help prevent it from falling.
- An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.
Perform the following operations:
Caution! To prevent paint damage, do not spill brake fluid onto any area of the bodywork. Spilled brake fluid will damage paintwork.
1. To drain the fluid from the master cylinder, attach a tube to the right hand caliper bleed nipple, loosen the nipple and allow the fluid to drain into a suitable container. Operate the brake lever until all fluid has been expelled.
Note: Note the position of the brake light switch for installation.
2. Disconnect from the master cylinder the:
- brake hose
- brake light switch.
3. Release the clamp screws from the handlebar to remove the master cylinder assembly.