Fault Code | Possible cause | Action |
P0560 | Bike voltage system fault | View & note diagnostic software 'sensor' data. Ensure voltage across battery is acceptable, note voltage. Disconnect ECM and proceed to pinpoint test 1: |
Pinpoint Teste
Test | Result | Action |
1. Check cable and terminal integrity: ECM pin A06 | OK | Proceed to test 2 |
Faulty | Rectify fault, proceed to test 3 | |
2. With Ignition 'ON', check voltage at: ECM pin A06 | Same as 'across battery' voltage | Proceed to test 3 |
Less than 'across battery' voltage | Locate and rectify wiring fault, proceed to test 3 | |
3. Reconnect harness, clear fault code and run engine to verify fault cleared | OK | Action complete - quit test |
Fault still present | Contact Triumph service |