- Remove left and right fairing side sections.
Warning: Comply with safety precautions when handling or working with fuel.
- Remove fuel tank.
See Group 16.
- Use hose clamps, BMW No. 13 3 010, to close off fuel hoses at injection rail.
![](https://motoinstruction.ru/img/bmw/21/127196.jpg)
- Pry out clip (1) at fuel injection rail.
- Using pliers, remove pressure regulator (2).
- Installation is the reverse of the removal procedure: pay particular attention to the following.
Note: Before installing, coat the sealing rings with clean engine oil (silicone-free) or rub them with Vaseline.