- Remove screws (arrows). Remove the throttle valve potentiometer.
- Install the new throttle valve potentiometer.
Note: Throttle valve actuator must be installed and connected. Throttle-valve potentiometer must be connected.
- Connect BMW MoDiTeC to diagnosis plug beneath front seat.
- Open the TOOLBOX menu and select THROTTLE-VALVE POTENTIOMETER or THROTTLE VALVE ACTUATOR.
- Follow the instructions of the BMW MoDiTeC.
- Tighten screws securing throttle-valve potentiometer.
- Perform function check with BMW MoDiTeC, menu item THROTTLE-VALVE POTENTIOMETER or THROTTLE VALVE ACTUATOR.
- Apply sealing lacquer to securing screws.
- Installation is the reverse of the removal procedure.
Tightening torque:
- Screws of throttle-valve potentiometer — 2 Nm