Tighten the screws (22) to the specified torque (Frame tightening torques).
![](https://motoinstruction.ru/img/ducati/18/124104.jpg)
Refit the plate (24) to the tail light - number plate holder assembly, securing it with the four screws (10) and washers (9).
While counterholding the special screws (19), tighten the screws (10) to the specified torque (Frame tightening torques).
Fit the screws (30) and tighten to the specified torque (Frame tightening torques).
![](https://motoinstruction.ru/img/ducati/18/124105.jpg)
![](https://motoinstruction.ru/img/ducati/18/124106.jpg)
Refit the tail light - number plate holder assembly to the rear subframe, inserting it as shown in the photo.
![](https://motoinstruction.ru/img/ducati/18/124107.jpg)
Fit the four screws (25) and tighten to the specified torque (Frame tightening torques).
![](https://motoinstruction.ru/img/ducati/18/124108.jpg)