![](https://motoinstruction.ru/img/ducati/18/124086.jpg)
Locate the plate (8) on the LH subframeo (10) and on the RH subframe (12) and insert the screws (9).
Tighten the screws (9) to the specified torque (Frame torque settings) in the sequence: 1-2-3-4.
![](https://motoinstruction.ru/img/ducati/18/124087.jpg)
Check that the rubber buffer (B), rubber bushes (17) and spacers (16) are installed on the bracket (15).
![](https://motoinstruction.ru/img/ducati/18/124088.jpg)
Refit the bracket (15) to the rear subframe with screws (12).
Counterhold the nuts (11), present only on the left-hand side of the rear subframe, and tighten the screws (12) to the specified torque (Frame torque settings), in the sequence: 5-6-7-8.
![](https://motoinstruction.ru/img/ducati/18/124089.jpg)
![](https://motoinstruction.ru/img/ducati/18/124090.jpg)
Refit the rear subframe to the engine (Refitting the engine).
Reconnect all the wiring connections of the electrical components mounted on the subframe (Routing of wiring on frame) and refit the silencers (Removal of the exhaust system).