![](https://motoinstruction.ru/img/ducati/18/124070.jpg)
1. Frame; 2. Clamp; 3. Nut; 4. Clearance adjuster; 5. Nut; 6. Special screw; 7. Rear subframe (right); 8. Plate; 9. Screw; 10. Rear subframe (left); 11. Nut; 12. Screw; 13. Pin; 14. Special nut; 15. Bracket; 16. Spacer; 17. Rubber mounting; 18. Screw
Caution! Bold reference numbers in this section identify parts not shown in the figures alongside the text, but which can be found in the exploded view diagram.
Disassembly of structural components and the frame
Before carrying out dimensional checks on the frame, you must remove all the superstructures fitted, referring to the removal procedures outlined in the sections of this manual.
The flow chart below illustrates the logical sequence in which the parts are to be removed from the motorcycle and gives a reference to the section of the manual in which the removal procedure is described.
![](https://motoinstruction.ru/img/ducati/18/124071.jpg)