Changing the turn signal light bulbs
Undo the screw (1) and detach the lens (2) from the turn signal support (3).
The bulb has a bayonet-type end fitting: to remove it, push it in and turn it counter-clockwise.
To remove the support (3), for the front turn signals refer to Renewal of the headlight, while for the rear turn signals, refer to Removal of the tail light-protection-number plate holder assembly.
Push in the new bulb and turn it clockwise until it clicks into place.
Refit the lens by inserting the tab (A) in the corresponding slot in the turn signal support.
Tighten the screw (1).
![](https://motoinstruction.ru/img/ducati/18/124894.jpg)