![](https://motoinstruction.ru/img/suzuki/4/113086.jpg)
Debugg
When starting, the starter motor does not work:
Place the transmission in neutral. Turn the ignition switch to position «ON». Depress the clutch. Listen for the click of the starter relay when the starter button is pressed.
Click:
Check if the starter rotates when its terminals are connected to «+» battery terminal. (Due to the large current flow, do not use thin wire).
- Rotates → Starter relay is faulty. The starter motor wire is loose or disconnected.
- Does not rotate → Faulty starter motor.
No click:
Measure the voltage at the starter relay connector (between Yellow/Green «+» and White/Black «-», when the starter button is pressed.
No voltage:
- Ignition switch is faulty
- Engine stop switch faulty
- Starter button faulty
- Clutch handle limit switch faulty
- Neutral relay faulty
- Neutral indicator faulty
- Poor contact in the connector
- Break in the wiring
There is tension:
Check the starter relay (6–13) → Not working properly → Starter relay is not working properly
OK → Poor starter relay contact.
The starter motor operates when the transmission is in neutral, but does not operate in any position other than neutral when the side stand is in the drive position (exhibited).
Check the side stand position switch (8–15).
Not working properly → The side stand position indicator is faulty.
OK → Poor connector contact; Break in the wiring.
The engine will not start when the starter motor is running → The starter clutch is faulty.