Removal
To remove the rider's seat, remove the rear seat (see page 16-13).
Grasp the riders seat on either side, and slide it rearwards and upwards for complete removal from the motorcycle.
To refit the seat, engage the seat's front rail into the bracket at the rear of the fuel tank and lower the rear rail in to the rear brackets. Push down firmly on the rear of the seat.
Refit the rear seat (see page 16-13).
1. Rider's seat
To refit the seat, engage the seat's tongue under the fuel tank and press down at the rear to engage in the seat lock.
Warning: To prevent detachment of the seat during riding, after fitting always grasp the seat and pull firmly upwards. If the seat is not correctly secured it will detach from the lock, A loose or detached seat could cause loss of motorcycle control and an accident.
Caution: To prevent damage to the seat and its cover, care must be taken not to drop the seat. Do not lean the seat against the motorcycle or a wall as it may fall. Instead, place the seat, with the seat cover facing up, on a flat surface which is covered with a soft cloth.