Removal
1. Remove the rider's seat (see page 16-13).
2. Disconnect the battery, negative (black lead first).
3. Remove the lower radiator panel (see page 16-14).
4. Remove and discard the radiator infill panel fixing.
1. Radiator infill panel; 2. Fixing
5. Remove the rear fixing and unhook the panel from the cockpit panel and fuel tank.
1. Upper radiator panel; 2. Fixing
6. Disconnect the direction indicator connectors and remove the panel.
Installation
1. Reconnect the direction indicator connectors.
2. Hook the front edge of the panel behind the cockpit panel and hook the tangs into the grommets on the fuel tank.
3. Refit the rear fixing and tighten to 5 Nm.
4. Fit a new radiator infill panel fixing and tighten to 3 Nm.
5. Refit the lower radiator panel (see page 16-14).
6. Reconnect the battery, positive (red) lead first.
7. Refit the rider's seat (see page 16-13).