Removal
The seat lock is located on the rear mudguard, below the rear light unit. To remove the seat, insert the ignition key into the seat lock and turn it anti-clockwise while pressing down on the rear of the seat. This will release the seat from its lock and allow it lo be slid rearwards for complete removal from the motorcycle.
1. Seat lock
To refit the seat, engage the seat's two brackets under the loops on the subframe and press down at the rear to engage in the seat lock.
1. Rear seat brackets; 2. Subframe loops
Warning: To prevent detachment of the seat during riding, after fitting always grasp the seat and pull firmly upwards. If the seat is not correctly secured, it will detach from the lock. A loose or detached seat could cause loss of motorcycle control and an accident.