Removal
1. Remove the rider's seat (see page 16-13).
2. Remove the rear fixing, located to the rear of the airbox.
1. Fuel tank infill panel; 2. Rear fixing (right hand shown); 3. Rear tang; 4. Front tang location
3. Lift the infill panel upwards, releasing the rear tang from the frame grommet.
4. Slide the infill towards the rear of the motorcycle and release the front mounting tang from the frame grommet.
Installation
1. Installation is the reverse of removal noting the following:
Note: Tighten the fixing to 3 Nm.