Removal
1. Detach the front brake hose from the two clips on the front mudguard.
2. Remove and discard the two rear fixings.
3. Support the front mudguard and remove the four lower fixings. Discard the fixings.
4. Remove the mudguard towards the front of the motorcycle.
1. Mudguard; 2. Brake hose clip; 3. Rear fixing; 4. Lower fixings
Installation
1. Position the front mudguard to the front forks.
2. Fit four new lower fixings and tighten to 6 Nm.
3. Fit two new rear fixings and tighten to 6 Nm.
4. Refit the front brake hose to the mudguard clips.