Note:Refer to the owner's handbook for the wheel pressure sensors ID numbers.
Fault Code | Possible cause | Action |
L0007 | Immobiliser/TPMS control module has lost communication with the front and rear wheel sensor units. Low battery voltage. Wrong sensor ID numbers have been registered in the immobiliser/TPMS control module | Using the Triumph diagnostic tool, check that the correct ID numbers for the wheel pressure sensors are registered to the lmmobiliser/TPMS control module. If the correct IDs are registered, replace the front and rear wheel pressure sensor following the procedure described in the Triumph diagnostic tool user guide. Record the new sensor's ID number into the owner handbook before fitting. |