Prepare
1. Remove front belt guard. See Belt guards.
2. Disconnect negative battery cable. See Power disconnect.
Remove
1. See Figure 8-19. Disconnect neutral switch connector.
- a. Disconnect neutral switch connector (1).
- b. Discard cable strap (2).
2. See Figure 8-20. Remove neutral switch.
- a. Discard cable strap (3).
- b. Remove screws (1).
- c. Remove neutral switch (2).
Install
FASTENER | TORQUE VALUE | |
Neutral switch screws | 5.0-7.0 Nm | 45-62 in·lbs |
1. See Figure 8-20. Install neutral switch.
- a. Install neutral switch (2).
- b. Install screws (1). Tighten to 5.0-7.0 Nm (45-62 in·lbs).
- c. Install new cable strap (3).
2. See Figure 8-19. Connect neutral switch connector.
- a. Connect neutral switch connector (1).
- b. Install new cable strap (2).
![](https://motoinstruction.ru/img/harley/22/127901.jpg)
Figure 8-19. Neutral Switch Connector: 1. Neutral switch connector; 2. Cable strap
![](https://motoinstruction.ru/img/harley/22/127902.jpg)
Figure 8-20. Neutral Switch: 1. Screw (2); 2. Neutral switch; 3. Cable strap
Complete
1. Connect negative battery cable. See Power disconnect.
2. Install front belt guard. See Belt guards.
3. Test neutral switch.
- a. Turn ignition switch ON.
- b. Verify transmission is in NEUTRAL.
- c. Verify that the neutral indicator light illuminates.