Prepare
1. Remove right side cover. See Side covers.
Remove
Fuses
1. See Figure 8-1. Remove main fuse (6).
2. See Figure 8-2. Remove fuses (5 through 13) as needed. Refer to Table 8-10.
Table 8-10. Fuse Ratings
NUMBER | FUSE | RATING |
5 | Battery | 5 Amp |
6 | Open | - |
7 | Open | - |
8 | Fuel pump | 10 Amp |
9 | Lights | 10 Amp |
10 | Lights/instruments | 10 Amp |
11 | Ignition | 15 Amp |
12 | Fan | 15 Amp |
13 | Accessory | 5 Amp |
Relays
1. See Figure 8-1. Remove main fuse (6).
2. See Figure 8-2. Remove relays (1 through 4) as needed.
Diode Pack
1. See Figure 8-1. Remove main fuse (6).
2. Remove diode pack (1).
Install
Fuses
1. See Figure 8-2. Install fuses (5 through 13) as needed. Refer to Table 8-10.
2. See Figure 8-1. Install main fuse (6).
Relays
1. See Figure 8-2. Install relays (1 through 4) as needed.
2. See Figure 8-1. Install main fuse (6).
Diode Pack
1. See Figure 8-1. Install diode pack (1).
2. Install main fuse (6).
![](https://motoinstruction.ru/img/harley/22/127883.jpg)
Figure 8-1. Electrical Panel: 1. Diode pack 2. Relay block 2 3. Relay block 1 4. Fuse block 5. Data link connector (DLC) 6. Main fuse
![](https://motoinstruction.ru/img/harley/22/127884.jpg)
Figure 8-2. Fuses and Relays: 1. System relay; 2. Ignition relay; 3. Starter relay; 4. Fan relay; 5. Battery fuse; 6. Open; 7. Open; 8. Fuel pump fuse; 9. Lights fuse; 10. Lights/instruments fuse; 11. Ignition fuse; 12. Fan fuse; 13. Accessory fuse
Complete
1. Install right side cover. See Side covers.
Warning: Be sure that all lights and switches operate properly before operating motorcycle. Low visibility of rider can result in death or serious injury.
2. Test affected circuit for proper operation.