Prepare
1. Remove main fuse. See Power disconnect.
2. Lift rear of fuel tank. See Lift rear of fuel tank.
3. Detach upper radiator hose from coolant filler neck. See Coolant hoses.
4. Detach radiator from mounts. See Removing and installing radiator.
Remove
1. See Figure 8-41. Disconnect cooling fan connector (4).
2. Remove cooling fan.
- a. Remove screws (3) and washers (2).
- b. Remove cooling fan (1).
Install
FASTENER | TORQUE VALUE | |
Cooling fan screws | 2.3-3.3 Nm | 21-29 in·lbs |
1. See Figure 8-41. Install cooling fan.
- a. Install cooling fan (1).
- b. Install screws (3) and washers (2). Tighten to 2.3-3.3 Nm (21-29 in·lbs).
2. Connect cooling fan connector (4).
Figure 8-41. Cooling Fan: 1. Cooling fan; 2. Washer (4); 3. Screw (4); 4. Cooling fan connector
Complete
1. Install radiator. See Removing and installing radiator.
2. Attach upper radiator hose to coolant filler neck. See Coolant hoses.
3. Fill coolant system. See Coolant of cooling system.
4. Secure rear of fuel tank. See Lift rear of fuel tank.
5. Install main fuse. See Power disconnect.