Prepare
1. Remove seat. See Removing and installing seat.
2. Remove main fuse. See Power disconnect.
Remove
1. See Figure 8-39. Disconnect ECM connectors.
2. See Figure 8-40. Remove ECM.
- a. Remove screws (1).
- b. Remove ECM (2).
3. Remove mud guard.
- a. Remove seat retention strap. See Removing and installing seat.
- b. Remove screws (3).
- c. Remove mud guard (4).
Install
FASTENER | TORQUE VALUE | |
Mud guard screws | 2.3-3.3 Nm | 21-29 in·lbs |
ECM screws | 2.3-3.3 Nm | 21-29 in·lbs |
1. See Figure 8-40. Install mud guard.
- a. Install mud guard (4).
- b. Install screws (3). Tighten to 2.3-3.3 Nm (21-29 in·lbs).
- c. Install seat retention strap. See Removing and installing seat.
2. Install ECM.
- a. Install ECM (2).
- b. Install screws (1). Tighten to 2.3-3.3 Nm (21-29 in·lbs).
3. See Figure 8-39. Connect ECM connectors.
Figure 8-39. ECM Connectors
Figure 8-40. ECM: 1. Screw (2); 2. ECM; 3. Screw (2); 4. Mud guard
Complete
1. Install seat. See Removing and installing seat.
2. Install main fuse. See Power disconnect.