Prepare
1. Remove main fuse. See Power disconnect.
2. Remove headlamp fairing. See Headlamp fairing.
3. Detach handlebar from lower riser. See Removing and installing handlebar.
Remove
1. See Figure 8-16. Disconnect speedometer connectors.
2. See Figure 8-17. Remove speedometer.
- a. Remove screws (1).
- b. Remove discharge plate (3).
- c. Remove speedometer (2).
Install
FASTENER | TORQUE VALUE | |
Speedometer screws | 10.8-13.2 Nm | 96-116 in·lbs |
1. See Figure 8-17. Install speedometer.
- a. Install speedometer (2).
- b. Install discharge plate (3).
- c. Install screws (1). Tighten to 10.8-13.2 Nm (96-116 in·lbs).
2. See Figure 8-16. Connect speedometer connectors.
![](https://motoinstruction.ru/img/harley/22/127898.jpg)
Figure 8-16. Speedometer Connectors
![](https://motoinstruction.ru/img/harley/22/127899.jpg)
Figure 8-17. Speedometer: 1. Screw (2); 2. Speedometer; 3. Discharge plate; 4. Lower riser bracket;
Complete
1. Install handlebar. See Removing and installing handlebar.
2. Install headlamp fairing. See Headlamp fairing.
3. Install main fuse. See Power disconnect.