Prepare
1. Remove main fuse. See Power disconnect.
Remove
Note: Replace oil pressure switch if it is removed.
1. Figure 8-18. Remove oil pressure switch connector (1).
2. Discard oil pressure switch (2).
Install
FASTENER | TORQUE VALUE | |
Oil pressure switch | 10.0-12.0 Nm | 89-106 in·lbs |
1. Figure 8-18. Install new oil pressure switch (2). Tighten to 10.0-12.0 Nm (89-106 in·lbs).
2. Install oil pressure switch connector (1).
![](https://motoinstruction.ru/img/harley/22/127900.jpg)
Figure 8-18. Oil Pressure Switch: 1. Oil pressure switch connector; 2. Oil pressure switch
Complete
1. Install main fuse. See Power disconnect.