MotoInstruction.ru
Mobile
version
Articles
& news
Site
map
Feed
back
Add to
bookmark
English Русский
Aprilia
BMW
Ducati
Harley
Honda
Kawasaki
Suzuki
Triumph
Yamaha
Triumph:
Rocket▾
Rocket III (2004-2018)
Street Triple▾
765 R/RS [4] (2017-2024)
Tiger▾
Tiger 800 (2010-2019)

Front sprocket cover — installation (Triumph Street Triple 765 R/RS)

  • Main
  • Triumph
  • Street Triple
  • 765 R/RS [4]
  • Engine and systems
  • Engine repair
  • Front sprocket cover — install…
0
Warning!
  • Make sure the motorcycle is stabilised and adequately supported.
  • A correctly supported motorcycle will help prevent it from falling.
  • An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.


Warning! Rotating the rear wheel will cause the drive chain to rotate on the sprockets. To prevent injury, never place loose clothing, fingers or hands near the drive chain or sprockets. Loose clothing, fingers or the hands could become trapped as the drive chain rotates on the sprockets causing a crushing injury to the fingers, hands or other parts of the anatomy.


1. Fit the sprocket cover, ensuring that the breather hoses and harnesses are routed as noted for removal.

2. Fit the sprocket cover fixings and evenly tighten to 9 Nm.

The article is reprinted from the website (Motoinstruction.ru)

1. Front sprocket cover; 2. Fixings; 3. Breather hoses and harnesses

1. Front sprocket cover; 2. Fixings; 3. Breather hoses and harnesses


Perform the following operations:
  • Gear change linkage - installation
  • Battery - installation
  • Seat - installation
See this article in russian language
This article has been reviewed: Kirill Prokofiev
◀ Previous
Triumph 765 R/RS 4: Engine repair
Next ▶

Front sprocket cover — removal
Alternator cover — installation
Alternator cover — removal
Clutch cover — installation
Crankcase right hand cover — removal
Crankcase right hand cover — installation
Cylinder head — exploded view
Cylinder head description
Similar articles about motorcycles of other brands
Tank front cover — removal and installation Honda Africa Twin 1000 (2015-2020)
Front and rear cylinder head cover Suzuki Boulevard M109R (2006-2025)
Removing the gear change lever, the sprocket cover and the… Ducati ST2 (1997-2003)
Front fork adjustment Yamaha FZ1 Fazer (2006-2015)
Cylinder head cover — removal Kawasaki ZX6R/ZX600J (2000-2002)
Link to this article in different formats
TEXTHTMLBB Code
Comments and feedback from visitors
No comments yet, you will be the first!
 


Add up two numbers: 23 + 29

       



 

 
765 R/RS 4 (2017-2024) 
  • Information for owner
  • Introduction to manual
  • Engine and systems
  • Engine repair
  • Fuel and control system
  • Lubrication system
  • Cooling system
  • Transmission
  • Running gear and frame
  • Frame and hinged elements
  • Front suspension and handlebar
  • Rear suspension
  • Brake system
  • Wheels and tires
  • Electric equipment
  • Equipment and devices
  • Starting and charging system
  • Electrical circuits
Aprilia BMW Ducati Harley Honda Kawasaki Suzuki Triumph Yamaha
MotoInstruction.ru © 2021–2025 | Sitemap | Articles | Contacts | Site search | Add to bookmarks | Mobile version