Caution! Do not operate the brake with the wheel removed.
Remove rear wheel. See Group 36.

Note: Retaining screws (1) are secured with Loctite 243 and should be heated if necessary before removal.
Remove retaining screws (1) with brake disc.
Remove brake disc.
Installation is the reverse of the removal procedure: pay particular attention to the following.
Caution! The inscription on the brake disc must face towards the outside.
Clean the threads of the securing screws and wheel hub, coat threads with Loctite 243 and install the screws.
Tightening torque:
- Brake disc to rear-wheel hub (clean thread + Loctite 243): 9 Nm