Caution! Refer to notes on the hazards involved in handling brake fluid.
Remove wheel cover together with chain cover.
Press the brake calliper against the brake disc in order to force the pistons back.
Cut through cable tie (1).
[ABS] Remove fastener securing ABS sensor (4) and remove ABS sensor.
Disconnect brake line (2) at brake calliper and seal the line.
Caution! Do not operate the brake with the wheel removed.
Remove rear wheel. See Group 36.
Caution! Do not damage brake pads.
Remove brake calliper (3) from the rear swinging fork.
Installation is the reverse of the removal procedure.
Note: Remove sealing rings for brake line.
Caution! Top up brake fluid and bleed brake system. Operate brake several times until brake pads are correctly seated.
Tightening torque:
- Brake line to brake calliper: 18 Nm
- ABS sensor to bracket: 9 Nm
- Quick-release axle: 100 Nm
- Wheel cover bracket to swinging arm: 9 Nm