Removing front ABS sensor ring (BMW F650GS)

0

Caution! Do not operate the brake with the wheel removed.

Note: Retaining screws (1) are secured with Loctite 243 and should be heated if necessary before removal.

Remove retaining screws (1) from brake disc.

Remove sensor ring (2).

Installation is the reverse of the removal procedure: pay particular attention to the following.

Clean the threads of the securing screws and wheel hub, coat threads with Loctite 243 and install the screws.

Check the ABS sensor gap and adjust if necessary. See Group 34.

Tightening torque:

• Brake disc to front-wheel hub (clean thread + Loctite 243): 9 Nm

See this article in russian language

Article about repair motorcycles «BMW F-series F 650 GS» (2000-2007): «Removing front ABS sensor ring»: https://motoinstruction.ru/en/BMW/F/F650GS/chassis/brake/112681 <a href="https://motoinstruction.ru/en/BMW/F/F650GS/chassis/brake/112681">Removing front ABS sensor ring</a> - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Brake system». [url=https://motoinstruction.ru/en/BMW/F/F650GS/chassis/brake/112681]Removing front ABS sensor ring[/url] - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Brake system».