Caution! Do not operate the brake with the wheel removed.
Remove front wheel. See Group 36.

Note: Retaining screws (1) are secured with Loctite 243 and should be heated if necessary before removal.
Remove retaining screws (1) with brake disc.
[ABS] Remove sensor ring (2).
Remove brake disc.
Caution! The inscription on the brake disc must face towards the outside.
Installation is the reverse of the removal procedure: pay particular attention to the following.
Clean the threads of the securing screws and wheel hub, coat threads with Loctite 243 and install the screws.
Check the ABS sensor gap and adjust if necessary. See Group 34.
Tightening torque:
- Brake disc to front-wheel hub (clean thread + Loctite 243): 9 Nm