Removing and installing rear brake master cylinder (BMW F650GS)

0

Place the motorcycle on its main (centre) stand.

Caution!

• Refer to notes on the hazards involved in handling brake fluid.
• Do not operate the brake when dismantled.

Drain the brake system.



Disengage piston thrust rod (3).

Disconnect brake line (5).

Disconnect hose from reservoir (4).

Remove fasteners (6) securing brake master cylinder.

Installation is the reverse of the removal procedure: pay particular attention to the following.

Secure brake line to brake master cylinder.

Caution!

• Top up brake fluid and bleed brake system.
• Operate brake several times until brake pads rest on disc.

Play at piston thrust rod: 0.5...1.5 mm (0.02...0.06 in).

Tightening torque:

• Brake line at master cylinder: 18 Nm
• Brake master cylinder to frame: 9 Nm

[The article is reprinted from this website: motoinstruction.ru]

See this article in russian language

Removing the rear brake master cylinder Yamaha FZ1 Fazer (2006-2015)
Exploded View — Rear Brake Master Cylinder Triumph Tiger 800 (2010-2019)
Master Brake Cylinder (Rear) — Removal and Disassembly Suzuki DRZ 250 (1996-2007)
Rear Brake Master Cylinder — Removal and Installation Honda CB 400 SF (1992-1999)
Removing the rear brake cylinder support and rear brake… Ducati ST2 (1997-2003)

Article about repair motorcycles «BMW F-series F 650 GS» (2000-2007): «Removing and installing rear brake master cylinder»: https://motoinstruction.ru/en/BMW/F/F650GS/chassis/brake/112677 <a href="https://motoinstruction.ru/en/BMW/F/F650GS/chassis/brake/112677">Removing and installing rear brake master cylinder</a> - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Brake system». [url=https://motoinstruction.ru/en/BMW/F/F650GS/chassis/brake/112677]Removing and installing rear brake master cylinder[/url] - article about repair motorcycles «BMW F-series F 650 GS» (2000-2007) from section «Brake system».