Caution! Refer to notes on the hazards involved in handling brake fluid.
Drain the brake system.
Remove brake microswitch.
Disconnect brake hose (1) from the brake master cylinder.
Remove screws securing brake master cylinder (2).
Installation is the reverse of the removal procedure: pay particular attention to the following.
Note: Replace the sealing rings for the brake hose.
Caution! Top up brake fluid and bleed brake system. Operate brake several times until brake pads are correctly seated.
Tightening torque:
- Brake hose to brake master cylinder: 18 Nm
- Brake master cylinder to handlebar: 9 Nm