Prepare
1. Remove air filter. See Inspect air filter.
Remove
1. See Figure 6-1. Remove backplate assembly.
- a. Remove screws (1, 5).
- b. Remove backplate (3) with seals (2, 4).
2. See Figure 6-2. Remove clamp and breather hose from backplate.
Note: See Figure 6-3. Inner snorkel (5) is threaded.
3. Remove snorkel assembly.
- a. Remove inner snorkel (5).
- b. Remove support (4).
- c. Remove outer snorkel (1).
- d. Remove gasket (3).
Install
FASTENER | TORQUE VALUE | |
Air cleaner backplate screws | 5.0-7.0 Nm | 45-62 in·lbs |
1. See Figure 6-3. Install snorkel assembly.
- a. Install outer snorkel (1).
- b. Insert gasket (3).
- c. Install support (4).
- d. Install inner snorkel (5).
2. See Figure 6-2. Attach breather hose with clamp to backplate.
3. See Figure 6-1. Install backplate assembly.
- a. Install backplate (3) with seals (2, 4).
- b. Install screws (1, 5). Tighten to 5.0-7.0 Nm (45-62 in·lbs).
![](https://motoinstruction.ru/img/harley/22/127842.jpg)
Figure 6-1. Backplate Assembly: 1. Screw (2); 2. Seal; 3. Backplate; 4. Seal; 5. Screw (2)
![](https://motoinstruction.ru/img/harley/22/127843.jpg)
Figure 6-2. Breather Hose
![](https://motoinstruction.ru/img/harley/22/127844.jpg)
Figure 6-3. Snorkel Assembly: 1. Outer snorkel; 2. Cover; 3. Gasket; 4. Support; 5. Inner snorkel
Complete
1. Install air filter. See Inspect air filter.