Fastener torque values in this chapter
The table below lists torque values for all fasteners presented in this chapter.
| FASTENER | TORQUE VALUE | NOTES | |
| Air cleaner backplate screws | 5.0-7.0 Nm | 45-62 in·lbs | Air cleaner assembly, Install |
| Charcoal canister bracket to frame nut | 5.3-6.5 Nm | 47-57 in·lbs | Charcoal canister: California emissions, Install |
| Charcoal canister to bracket screws | 1.7-2.3 Nm | 15-20 in·lbs | Charcoal canister: California emissions, Install |
| Exhaust shield clamps | 2.3-4.5 Nm | 21-39 in·lbs | Exhaust system, Assemble |
| Exhaut to engine nuts | 8.0-10.0 Nm | 71-88 in·lbs | Exhaust system, Install |
| Front exhaust pipe clamp | 10.0-12.0 Nm | 89-106 in·lbs | Exhaust system, Assemble |
| Fuel pump assembly nuts | 4.2-4.5 Nm | 38-39 in·lbs | Fuel pump assembly, Install |
| Fuel rail screws | 2.5-4.5 Nm | 23-39 in·lbs | Fuel injectors, Install |
| IAC screws | 2.0-4.0 Nm | 18-35 in·lbs | Idle air control (IAC), Install |
| Induction module screws | 2.5-4.5 Nm | 23-39 in·lbs | Idle air control (IAC), Install |
| Muffler bracket screws | 22.5-27.5 Nm | 17-20 ft·lbs | Exhaust system, Assemble |
| Muffler clamp | 52.0-58.0 Nm | 39-42 ft·lbs | Removing and installing muffler, Install |
| Muffler nuts | 25.0-30.0 Nm | 19-22 ft·lbs | Removing and installing muffler, Install |
| Muffler nuts | 25.0-30.0 Nm | 19-22 ft·lbs | Exhaust system, Install |
| Oxygen (02) sensor | 16.0-19.0 Nm | 12-14 ft·lbs | Oxygen (O2) sensor, Install |
| Rear fuel tank screw | 24.3-29.7 Nm | 18-21 ft·lbs | Lift rear of fuel tank, Secure |
| TMAP screw | 25-4.5 Nm | 23-39 in·lbs | Temperature manifold absolute pressure (TMAP) sensor, Install |