Removal
1. Remove the rider's seat (see page 16-13).
2. Disconnect the battery, negative (black) lead first.
3. Remove the rear rack (see page 16-20).
4. Remove the rear grab handle bolt.
5. Remove the front nut and bolt and remove the grab handle.
1. Rear grab handle; 2. Rear bolt; 3. Front bolt/nut (nut not shown)
6. Remove the side panel bolts and nuts. Collect the pannier mount plates from the bolts.
7. Remove the side panel lower fixing and remove the side panel.
1. Side panel (left hand shown); 2. Bolts/nuts (nuts not shown); 3. Pannier mount plates; 4. Lower fixing
Installation
1. Refit the side panel and secure with the lower fixing. Do not tighten the fixing at this stage.
2. Refit the pannier mounting plates to the bolts and refit the bolts. Refit the nuts and tighten to 20 Nm.
3. Tighten the lower fixing to 5 Nm.
4. Refit the grab handle and secure the front with the bolt and nut and rear with the bolt. Tighten both fixings to 20 Nm.
5. Refit the rear rack (see page 16-21).
6. Reconnect the battery, positive (red) lead first.
7. Refit the rider's seat (see page 16-13).