Fastener torque values (Harley Street 750)

0

Fastener torque values in this chapter

The table below lists torque values for all fasteners presented in this chapter.

FASTENER	TORQUE VALUE		NOTES
Coolant drain screw	10.0-12.0 Nm	89-106 in·lbs	Coolant of cooling system, Drain and Fill Cooling System
Coolant overflow tank screws	2.3-3.3 Nm	21-29 in·lbs	Coolant overflow tank, Install
Coolant pump and cover screws	10.0-12.0 Nm	89-106 in·lbs	Coolant pump, Install
Coolant thermostat housing screws	9.0-11.0 Nm	80-97 in·lbs	Thermostat housing, Install
Engine coolant temperature sensor (ECT)	15.0 Nm	133 in·lbs	Engine coolant temperature (ECT) sensor, Install
Radiator screws	9.0-11.0 Nm	80-97 in·lbs	Removing and installing radiator, Install
Radiator shroud screws	9.0-11.0 Nm	80-97 in·lbs	Removing and installing radiator, Install

(The original text is located on the resource: MotoInstruction.ru)

See this article in russian language

Torque values for motorcycle repair Honda VTX 1800 C (2001-2008)
Torque wrench settings Triumph Rocket III (2004-2018)
General tightening torque specifications Yamaha FZ1 Fazer (2006-2015)
Tightening torque Suzuki DRZ 250 (1996-2007)
Torque and locking agent Kawasaki ZX6R/ZX600J (2000-2002)

Article about repair motorcycles «Harley Street 750/500» (2014-2021): «Fastener torque values»: https://motoinstruction.ru/en/Harley/Street/750/engine/cooling/116056 <a href="https://motoinstruction.ru/en/Harley/Street/750/engine/cooling/116056">Fastener torque values</a> - article about repair motorcycles «Harley Street 750/500» (2014-2021) from section «Cooling system». [url=https://motoinstruction.ru/en/Harley/Street/750/engine/cooling/116056]Fastener torque values[/url] - article about repair motorcycles «Harley Street 750/500» (2014-2021) from section «Cooling system».