Prepare
1. Remove main fuse. See Power disconnect.
2. Lift rear of fuel tank. See Lift rear of fuel tank.
3. Drain coolant. See Coolant of cooling system.
Remove
1. See Figure 7-13. Disconnect ECT connector (1).
2. Remove sensor (2).
Install
FASTENER | TORQUE VALUE | |
Engine coolant temperature sensor (ECT) | 15.0 Nm | 133 in·lbs |
1. See Figure 7-13. Install coolant temperature sensor (2). Tighten to 15.0 Nm (133 in·lbs).
2. Connect ECT connector (1).
![](https://motoinstruction.ru/img/harley/22/127881.jpg)
Figure 7-13. Engine Coolant Temperature (ECT) Sensor: 1. ECT sensor connector; 2. ECT sensor
Complete
1. Fill system with coolant. See Coolant of cooling system.
2. Secure rear of fuel tank. See Lift rear of fuel tank.
3. Install main fuse. See Power disconnect.